Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Controls and indicators
- Operation
- Before first use
- Filling the coffee bean container
- Filling the water tank
- Switching on and off
- Dispenser adjustment
- Preparing beverages
- Expert Mode
- Grinder setting
- Parameters
- Profiles
- MobileStart
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and grounds container
- Cleaning the drip-tray cover
- Cleaning the water container
- Cleaning the main dispenser
- Cleaning the cup-rim sensor
- Cleaning the milk flask with lid
- Cleaning the milk valve (daily)
- Removing and cleaning the milk valve (once a month)
- Cleaning the bean containers
- Cleaning the interior, inside of the machine door, and drip tray
- Cleaning the front of the machine
- Maintenance programs
- _
- _
- Cleaning the milk pipework
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Frequently Asked Questions
- Service and warranty
- Accessories
- Caring for the environment
- Installation
- FCC Declaration of Conformity
Preparing beverages
36
Remove the tea filter or tea bag when
the desired brewing time has
elapsed.
Tea pot
The Tea Pot function allows you to make
a large quantity of tea (maximum
of1liter). The type of tea selected
determines the preset temperature.
The drinks menu is displayed.
Tip: Make sure that the water container
has enough water inside it before
starting the Tea Pot function.
Place a sufficiently large container
under the main dispenser.
Tap the drinks sensor button.
Select Tea Pot.
Select the type of tea and number of
cups you want (3to8).
Canceling a drink
Tap the sensor button.
Dispensing warm or hot water
You can choose between the following
options:
- Hot water at approx.195°F (90°C)
- Warm water at approx.150°F (65°C)
The drinks menu is displayed.
Place a suitable container under the
main dispenser.
Tap the sensor button.
Choose between warm or hot water.
Confirm withOK.
Dispensing will start.