Operating and Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Guide to the appliance
- Controls and indicators
- Operation
- Before first use
- Filling the coffee bean container
- Filling the water tank
- Switching on and off
- Dispenser adjustment
- Preparing beverages
- Expert Mode
- Grinder setting
- Parameters
- Profiles
- MobileStart
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and grounds container
- Cleaning the drip-tray cover
- Cleaning the water container
- Cleaning the main dispenser
- Cleaning the cup-rim sensor
- Cleaning the milk flask with lid
- Cleaning the milk valve (daily)
- Removing and cleaning the milk valve (once a month)
- Cleaning the bean containers
- Cleaning the interior, inside of the machine door, and drip tray
- Cleaning the front of the machine
- Maintenance programs
- _
- _
- Cleaning the milk pipework
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Frequently Asked Questions
- Service and warranty
- Accessories
- Caring for the environment
- Installation
- FCC Declaration of Conformity
Installation
*INSTALLATION*
85
Never align the coffee machine by
adjusting the door hinges. This will
prevent the milk flask from attaching
correctly and interfere with the milk-
preparation process.
Removing transport restraints
2 screw holes are fitted with red silicone
plugs to protect the appliance against
transport damage and secure the door
during transport.
Remove the plugs before screwing
the coffee machine to the cabinet
unit.
Pull firmly on the red silicone plugs to
remove them from the screw holes.
The plugs are not required for any
other purpose. Dispose of them with
your household waste.
Screwing the coffee machine to the
cabinet
Open the appliance door.
FourTX20 (25mm) screwsare
supplied with the machine.
Secure the coffee machine to the side
walls of the cabinet using the screws
supplied. Start with the top-left
screw. Proceed in a clockwise
direction to tighten the other screws.
Tighten all screws by hand.
Carry out a functional check on the
coffee machine.