Operating and Installation instructions

Cleaning and care
59
Cleaning the milk valve (daily)
The milk-valve seal can be damaged
by objects with sharp edges or
similar.
Do not use any sharp-edged objects
(such as knives) to clean the milk
valve.
The milk valve is located under the
bean container on the left-hand side.
If allowed to dry, milk residues can
become encrusted on the stainless-
steel bolt. These crusty deposits are
difficult remove. Therefore, it is
important to carry out regular cleaning
after preparing milk.
 Open the appliance door.
 Clean the milk valve with a damp
cloth/microfiber cloth.
 Close the appliance door.
Removing and cleaning the
milk valve (once a month)
If the following issues occur during milk
preparation, the milk valve may be
blocked: only hot milk is dispensed
instead of milk froth, the milk sprays
out. Clean the milk valve more often if
necessary.
The milk-valve cover should only be
cleaned by hand.
 Open the appliance door.
 Remove the bean container and
maintenance container on the left-
hand side.
 Remove the main dispenser’s
stainless-steel cover.
 Remove the milk-valve cover: press
on the recessed grip to unlock the
cover.
On the top right-hand side of the
cover, you will find a pin for swiveling
the cover out.