User manual

H.264 Network Digital Video Recorder User Manual
40
4.7 PTZ config
Picture 4.15 PTZ setup
channelChoose the dome camera input channel.
protocolChoose the corresponding dome protocol. (PELCOD as an example)
addressSet as the corresponding dome address. Default: 1.NoteThe address must be consistent with the
dome address.
baud rateChoose the corresponding dome baud rate length. You can control the PTZ and camera. Default:
115200.
date bitInclude 5-8 options. Default: 8.
stop bitInclude 2 options. Default: 1.
checkInclude odd check, even check, sign check, blank check. Default: void.
4.8 Alarm setup
Alarm functions include: Motion Detect, Video Blind, Video Loss, Alarm Input and Alarm Output.
4.8.1 Motion Detect
When system detects the motion signal that reaches the set sensitivity, the motion detect alarm is on and the
linkage function is turned on.
Note: The Advanced button with the right mouse button.