User manual

H.264 Network Digital Video Recorder User Manual
34
service parameter configuration items.
Picture 4.5 network service
PPPoE setup
Picture4.6 PPPOE setup
Input the user name and password that ISPInternet service providerprovides. After saving it reboot up
your system. Then the DVR will build a network connection based on PPPoE. The IP address will change into
dynamic IP address after above operation is well done.
OperationAfter PPPoE dialing successfully look up the IP address in the [IP address] and obtain the
current IP address. Then use this IP address to visit the DVR through user port.
NTP setup
Picture 4.7 NTP setup
The NTP server must be installed in the PC.