User manual

H.264 Network Digital Video Recorder User Manual
29
PTZ
config
Set channel, PTZ protocol, address, baud rate, date bit, stop bit, check
Alarm
Motion
detection
Set motion detect alarm channel, sensitivity, area, linkage parameters: defending
time section, alarm output, screen hint, recording, PTZ, patrol
Video
shelter
Set camera mask alarm channel, sensitivity, linkage parameters: defending time
section, alarm output, screen hint, recording, PTZ, patrol
Video
loss
Set video loss alarm channel, linkage parameters: defending time section, alarm
output, screen hint, recording, PTZ, patrol
Alarm
input
Set alarm input channel, equipment type, linkage parameters: defending time
section, alarm output, screen hint, recording, PTZ, patrol
Alarm output Set alarm mode: configuration, manual, shut down
System
General
Set system time, data format, language, hard disk full time operation, machine
number, video format, output mode, summertime, stay time
GUI Display
Set channel name, preview hint icon state, transparency, cover area, time title,
channel time fold and Set patrol mode and interval time
Account Modify user, team or password. Add user or team. Delete user or team.
Upgrade Upgrade to the DVR software system
Resume config
Resume setup state: common setup, code setup, recording setup, alarm setup,
network setup, network service, preview playback, serial port setup, user
management
Backup Detect or format backup equipment, back the selective files
Device Info
Provision of equipment interface device information to facilitate the
understanding of our customers use.
Auto Maintain
Users can set the device to automatically reboot the system on their own time,
and automatically delete the file set time period.
4.2 Record Mode
Control the recording status of each channel, through the main menu>record mode enter the record
mode interface,and also be right on the desktop directly into the shortcut menu.