User manual

H.264 Network Digital Video Recorder User Manual
19
Page SwitchSwitch between different windows.
Special Functions:
1

Preset
Set a location for the preset, calls the preset points, PTZ automatically turns to the setting position
1Preset option
Set a location for the preset, procedure is as follows:
Step1: in Picture 3.8, click the Direction button will turn into preset position,click the Settings button to enter
Picture 3.9.
Step 2: click the Preset button , then write the preset points in the input blank,
Step 3: click Set button, return the Picture 3.8 Complete setup, that is the preset points and preset position
corresponds.
Remove PresetInput preset points, click Remove button, remove the preset
Picture 3.9 Preset Settings
2Preset Point Calls
In Picture 3.8, click Page Shift button, enter PTZ control interface as shown in Picture 3.10. In the input
blank, write the preset points, then click Preset button, PTZ turn to the corresponding preset point.
Preset button
Preset point input blank
Value input blank