Instruction manual

88 | P a g e
8-7-3-3. PTZ
Setting the PTZ Control: Sets the communication environment for remotely operating PTZ dome cameras connected
to RS485 terminals.
Camera channel designation
Name: Sets the protocol type for the specified channel. When connecting multiple cameras, set the same protocol
for all.
Speed: Sets the communication speed. The set value applies to all channels.
ID: Sets the camera ID.
Apply: Click APPLY to save the changes of the value.
8-7-4. Storage
Select Storage to configure continued recording settings by overwriting the hard disk and the storage period for the
recording data.
Overwrite: To continue recording by overwriting when the hard disk becomes full, check the checkbox.
Record Limit: Sets whether to limit or not the recording data storage period.
Record Limit Days: Sets a recording data storage period.
S.M.A.R.T.: Sets the TEMPERATURE LIMIT of the Hard Disk to trigger the ALARM and the BUZZER.
Apply: Click APPLY to save the changes of the value.