Instruction manual

86 | P a g e
These settings apply to all channels.
OSD: Sets whether to display or not date and time as well as channel number on the screen.
OSD Contrast: Adjust the character contrast on the screen.
Sequence: Setting for automatically switching the displayed video.
Sequence-Dwell Time: Sets the interval for automatically switching the screens.
These settings apply to the specified channel only.
Channel designation
Channel Name: Sets a channel name.
Covert: Sets whether to display or not video from the channel on the monitor.
Apply: Click APPLY to save the changes of the value.
8-7-2. Record
Select RECORD tab to set the recording conditions.
These settings apply to the specified channel only.
Channel Designation
Resolution: Sets the resolution for the recordings. The set value applies to an individual channel.
Frame Rate: Sets the recording rate.
Quality: Sets the image quality in 5 levels.
Recording: Sets the recording mode.
Sensor Recording: Sensor recording is performed when an external sensor signal is input to the specified external
sensor input terminal.
Pre Record: Sets whether to perform or not pre recording.
Post Event Record: Sets the duration of the event recording.
Audio: Sets whether to perform or not audio recording.
Apply: Click APPLY to save the changes of the value.