Instruction manual

40 | P a g e
DAY LIGHT SAVING
Select DAYLIGHT SAVING using the mouse and the control button (◀ ▲ ▶ ▼)
on the remote control and select the appropriate daylight saving time zone.
If choosing EU or OTHERS, set the applicable conditions.
The options are:
OFF
USA
EU
OTHERS
1. OFF: Daylight saving is turned off.
2. USA: Applies the USA daylight saving time.
3. EU: Applies the EU daylight saving time.
- Select the GMT AREA using the control button (◀ ▲ ▶ ▼).
- Set the time difference with the standard time using the control button
(◀ ▲ ▶ ▼).
4. OTHERS: If the time zone is neither USA nor EU, set the start and end date
of the daylight saving period.
- Select BEGIN or END using the control button (◀ ▲ ▶ ▼) and
press the SEL button.
- Select the item using the control button (◀ ▲ ▶ ▼), select the
setting value using the control button (◀ ▲ ▶ ▼) and press the
ESC button to return to SET DATE & TIME setup menu.
CAUTION:
- Do not set the start time to 23:00 for DLS.
- DLS can’t be applied if the date of BEGIN and END is the same.
CLIENT ACCESS
Enable/Disable remote access through network client software.
NTP
NTP is an abbreviation for Network Time Protocol, which is for synchronizing the
time of the computer systems over variable-latency data networks.