Specifications

4. SET HOLIDAY SCHEDULE

Note: Each Holiday must be programmed with a beginning and ending month and date.

Beginning and ending dates can not be the same.

STEP PRESS INDICATION COMMENT

1 TIME SET Enter Security Access Code

2 MODE HOLIDAY, BEGIN,

MONTH

3 AHEAD/BACK Set month of holiday

(1=Jan. 12 = Dec.)

4 SELECT BEGIN, DATE

5 AHEAD/BACK Set date for first day of holiday

6 SELECT END, MONTH

7 AHEAD/BACK Set month of holiday ending

8 SELECT END, DATE

9 AHEAD/BACK Set date for first day of normal operation

10 ENTER The display will blank momentarily

11 CANCEL Return to normal operation

A total of ten holidays may be programmed by repeating steps 3 thru 10. All holiday starting

and ending dates must be within the next twelve calendar months. Operation of the output

circuits is inhibited During holidays.

5. OUTPUT CIRCUIT PROGRAMING

All output circuit programs entered will remain in the memory until cancelled.

All output circuits with a programmed ON time must have a programmed OFF time or DURATION.

Assume circuit 1 is to ring a bell for 10 seconds Monday thru Friday at 8:00 AM, 12:00 Noon, and

4:00 PM.

STEP PRESS INDICATION COMMENT

1 TIME SET Enter security access code

2 MODE DURATION

3 CIRCUIT CIRCUIT 1

4 AHEAD/BACK Set display to 10 (Range = 1-59 Sec.)

5 ENTER Display will blank momentarily

6 MODE ON

7 DAY MO,TU,WE,TH,FR

8 AHEAD/BACK Set time to 8:00 AM

9 ENTER Display will blank momentarily

10 AHEAD/BACK Set time to 12:00 Noon (PM Ind. ON)

11 ENTER Display will blank momentarily

12 AHEAD/BACK Set time to 4:00 PM

13 ENTER Display will blank momentarily

14 CANCEL Return to normal operation