Installation Instructions

7
INSTALLATION CONTINUED
1. Pump On/Off:
1st Press - The pump starts.
2nd Press - The pump stops.
2. Light Button:
Operates LED lighting systems.
3. Use Button to decrease air jet speed
while the blower is running. Press &
hold to increase the blower speed, release
pressure at the desired speed.
4. Use Button to increase air jet speed
while the blower is running. Press & hold
to lower the blower speed, release pressure
at the desired speed.
5. Blower On/Off:
1st Press-the blower starts.
2nd Press-the blower stops.
Purge Cycle:
There are two different purges: The first at 30
minutes after the tub is used and the second every
24 hours at the time determined by when power is
turned on at the breaker box.
4 3
5
1
2
AVANO TOUCH PLUS
START UP AND OPERATIONAL INSTRUCTIONS
6
Increase Pressure Decrease Pressure
6. Air Pressure Control
Turn control knob to increase or
decrease the speed and pressure for
the water jets. The water jets pressure
control is divided between 2 air
pressure controls on either side of the
tub.