Brochure 2

FORGED BLADE STANDARD OFFSET MODELS
Standard Offset Models are versatile and easiest to use. They cut a wide range of sheet materials
including sheet metal, vinyl, plastic, rubber, screening, canvas, cloth, cardboard, etc.
MW-P6510S Offset Straight Aviation Snip
Cuts straight and wide curves to the left and right.
Use in either hand. Bottom blade serrated. Slightly
longer blade cut length than left and right models.
MW-P6510L Offset Left Aviation Snip
Cuts straight and tight left curves. Easiest used in
right hand. Bottom blade serrated. Meets ASME
Standard B107.500-2010(B107.16).
MW-P6510R Offset Right Aviation Snip
Cuts straight and tight right curves. Easiest used
in left hand. Bottom blade serrated. Meets ASME
Standard B107.500-2010(B107.16).
FORGED BLADE
SPECIAL HARDNESS
OFFSET MODELS
Special Hardness Offset Models are recommended
for cutting extremely hard sheet materials such as
stainless steel, inconel, titanium, etc.
FASTER!
Cuts “Pinch-Thru-Point” &
Requires Less Hand Force
Precision cuts completely to blade tip end
which reduces cutting strokes and enables
complete and accurate trim cuts.
EASIER!
Stays In Adjustment & Flows
Material Away From Blades
Blade pivot bolt is threaded into bottom
blade keeping blades in adjustment for ease
of operation. Offset blade pattern flows
material away from blades for a smooth
forward cutting action.
SAFER!
Lifts Hand Above Material &
Ergonomic Handle Width Opening
Keeps hand safely above sharp edges of
material being cut. Reduces muscle stress.
Latch keeps blades safely closed when snip
is not in use.
Longest Lasting Cutting Edge
Blades are hot drop-forged of molybdenum
alloy steel and austemper heat-treated.
Strongest Blades
Hot drop-forged process uses grain structure
of steel to produce maximum strength.
Optimum Serrations
Blades serrated 40 serrations per inch grip
material without scarring.
Highest Quality Components
Grade 8 blade pivot bolt and heavy-duty
double-overwind spring are unconditionally
guaranteed!
Compound Leverage
Multiplies handle force to cutting blades
by 8 : 1 power ratio.
Strongest Handles
High tensile strength steel will not bend
from hand pressure and provides most
efficient conversion of hand force to
cutting power.
Comfortable Handle Grips
Thick textured Santoprene
®
grips comfort
user’s hand and prevent steel handles from
wearing through.
MW-P6510S MW-P6510L MW-P6510R
MW-SSP6510L MW-SSP6510R
MW-SSP6510L Special Hardness Offset Left Aviation Snip
Cuts straight and tight left curves. Use to cut hardened
metals. Easiest used in right hand. Bottom blade serrated.
MW-SSP6510R Special Hardness Offset Right Aviation Snip
Cuts straight and tight right curves. Use to cut hardened
metals. Easiest used in left hand. Bottom blade serrated.
Offset Models
The Sheetmetal
Tradesman’s Choice
Midwest Snips
®
forged blade offset model aviation snips are the world’s best!
We offer three different blade pattern models and two blade hardness options in
this product category as well as two tradesmen sets. These models perform
superior to respective model ASME Performance Requirements.
Our offset model aviation snips are “The Sheetmetal Tradesman’s Choice”
because they are truly the easiest models to use in a variety of sheetmetal cutting
applications. The offset blade pattern flows material away from the blades. This
allows the snip to move forward without interference when making cuts through
long sheets. It also allows the snip to cut tighter curves than other blade pattern
models. The left and right blade pattern models cut the tightest curves
while the straight blade pattern offers a slightly longer length of cut.
0605
AVIATION SNIPS