Assembly Instructions

Assemble
7
Pond Liner
Level 5
(1) 7’ x 10’ Pond Liner(16) Belgian Large Wall Blocks
Cut Belgian Large Wall Block to 7”, then, using a chisel or a
circular saw tted with a masonry blade, cut a 1½” x 1½”groove
from the corner for the Pond Tubing to run through. The tubing
will be run after the Pond Pump has been installed.
Center the Pond Liner above the basin, then conform the liner
to t the interior. Do not trim the extra liner until after there has
been water added to the basin.
Wait for glue to fully dry before proceeding to the next steps.
Refer to the label on your construction adhesive for dry times.