Assembly Instructions

Assemble
10
Level 9Level 8
(10) Belgian Wall Block (10) Belgian Large Wall Block
(1) Spillway
Use a chisel or a circular saw tted with a masonry blade
to cut a 1” x 1” groove out of the corner of a block to allow
power cords to exit the fountain. (Cut block closest to outlet)
Attach the 1¼” tubing to the spillway from the pond pump.
Take the power cords from both the spillway and pond
pump and place them in the groove of the notched block.
Lay blocks ush with the outside edge of the layer below.
Blocks cut to 3½”L
Block cut to 7”L