Installation Instructions

Product of Canada; Packaged in Eau Claire, Wi. U.S.A.
NOTE: Table must be finished with a protec-
tive sealant, stain & varnish, or painted in
order to prevent twisting or warping of the
wood and to ensure long life of your table.
CLASSIC PICNIC TABLE
TOOLS NEEDED:
SCREWDRIVER 9/16” WRENCH
TAPE MEASURE
OPTIONAL DRILL & 1/8” BIT
NOTE: The wood for this product is sorted to have one
face for appearance. Certain imperfections common in
wood may be present on the backside of the boards.
Keep this in mind when assembling this product.
Attach two
outside top
boards A
to the
frames using
one
screw as
shown. Note direction of angles.
Measuring
corner to corner
as shown,
measurements
A and B must be
the same for the table top to be
square. Adjust the table until it
is square, then put in the second
screw to hold in place.
Attach the two
braces as shown.
Flush
Flush
6”
STEP 1
STEP 3
STEP 4
STEP 5
STEP 6
STEP 2
B
B
C
C
D
A
A
A
A
A
A
A
A
B
D
D
D
E
E
Underside
View
We suggest predrilling
1
⁄ 8” pilot
holes to avoid splitting of wood.
Assemble the
frames with 3/8”
diameter hex
bolts as shown.
6”
A
B
Using two screws,
attach two of the outside
seat boards to the frames as shown.
Evenly space
the remaining
boards in place on the top and seat and
attach using two screws per joint.