Assembly Instructions

ManualsBrandsMidwest Manufacturing ManualsBuilding materials12' Gable EZ Build Storage Building Frame

STEP 9. SQUARE THE BUILDING

STEP 10. FLOOR SUPPORTS

STEP 11. ¾" FLOOR SHEATHING

STEP 8. RAISE FRAMES

At base of building, measure diagonally. Adjust building

until AD=BC. Building is then square. See gure 7.

12' Building: Cut (2) pieces of ¾" 4'×8' oor sheathing

into (3) 48"×47½" pieces. Use these pieces along with

(3) 48"×95½" sheets.

16' Building: Use (6) ¾" 48"×95½" sheathing sheets.

20' Building: Cut (2) pieces of ¾" 4'×8' oor sheathing

into (3) 48"×47½" pieces. Use these pieces along with

(3) 48"×95½" pieces and (3) full ¾" 4'×8' sheets.

Notch oor sheathing to t around side wall frame

members. Attach using 8D nails every 8" O.C.

From treated 2×4’s, cut

rim joists:

• 143" for a 12' building

• 191" for a 16' building

• 239" for a 20' building

Place the rim joists 12'

apart. Plumb and brace

end frames. Nail rim

joists to frames and end

walls using 10d nails.

See gure 7. Brace and

stand up the remaining

frames. Nail rim joists to

frames at 22½" between

interior frames and 21¼"

to outside edges.

Figure 6

Temporary

braces

Standard

Frames

12'×16' Building Shown

21¼"

22½"

191"

22½"

1½"

Outside edge of frame

to outside edge of frame

Figure 7

21¼"

12'×16'

Building Shown

12'×16' Floor

Sheathing shown

21¼"

22½"

1½"

21¼"

Figure 8

48"

95½"

Figure 9

From treated 2×4’s cut (4) 21¼" oor

supports and the required 22½" oor

supports: 8 for a 12' building; 12 for a

16' building; 16 for a 20' building. Install

using 10d nails. See gure 8.