Installation Instructions

48
Step 1 - Stake out & remove sod
Begin by staking out the project. For curved sections use a
garden hose to lay out the edging line. The depth of the trench is
dependent upon how far above grade you want your edger units
to appear.
Step 4 - Cut edgers
Edgers may be cut easily to nish the end of a run by using a
circular saw with a masonry blade. A hammer and chisel may
also be used to cut edgers. Finish your project by raking the rock,
mulch or dirt to the inside edge of the edgers.
Step 3 - Lay & level edgers
Place edgers end to end in the base. Using a rubber mallet, tamp
the edgers rmly iinto place. Continue to place edgers until the
desired length of the project is nished. Using a level will help
ensure your edgers are uniformly level.
Step 2 - Clear areas of debris
Prepare trench by removing roots and rocks. Smooth and place
1" of paver base in the bottom of the trench.
INSTALLING EDGERS