Installation Instructions

RETAINING WALLS

90° Corner

90° Corner Flipped

and Turned

1st Course

3rd Course Same

as 1st Course

2nd Course

Step 1 - Base Course Preparation with Corner Block

Using Corner Blocks for outside corners, begin an outside corner from the corner of the wall and

install the blocks from the corner out when possible.

Step 2 - Successive Course Installation

Stagger the Corner Block as each successive course is installed so it is on the opposite side of the

wall corner. This corner unit should be pushed back 3/4" to achieve proper setback. Length

adjustments to the Corner Block may be necessary to maintain a running bond. Also, always core

ll and glue each corner unit to ensure proper interlock.

CLIFTON OUTSIDE CORNER

DENVER BEVELED OUTSIDE CORNER