Installation Instructions

49
Installation Options
Paver Base / Step 1 Leveling Sand / Step 2 Paver Locking Sand / Step 3
Install pavers over a rm, stable base using one of the four installation diagrams shown below. If installing
Paver Locking Sand on a non-drainage bed system, there must be a slope to avoid water pooling on the pavers.
Paver Locking sand is the 3rd part of a 3-step standard installation system when installing pavers or patio
blocks. By using Step 1 Paver Base, Step 2 Leveling Sand, and Step 3 Paver Locking Sand you will achieve the
best results. Paver surface must be dry and clean prior to application of Step 3 Paver Locking Sand to prevent
materials from adhering to and hardening on top of the pavers.
Paver Installation Steps