Installation Instructions

PAVER BASE / STEP 1
LEVELING SAND / STEP 2 PAVER LOCKING SAND / STEP 3
Install pavers over a firm, stable base using one of the four installation diagrams shown below. If
installing Paver Locking Sand on a non-drainage bed system, there must be a slope to avoid water pooling
on the pavers. Paver Locking sand is the 3rd part of a 3-step standard installation system when installing
pavers or patio blocks. By using Step 1 Paver Base, Step 2 Leveling Sand, and Step 3 Paver Locking Sand
you will achieve the best results. Paver surface must be dry and clean prior to application of Step 3 Paver
Locking Sand to prevent materials from adhering to and hardening on top of the pavers.
INSTALLATION OPTIONS
PAVER STONE INSTALLATION STEPS