Installation Instructions

AVAILABLE COLORS:

DIMENSIONS:

WEIGHT:

Approx. 5 lbs

BLOCK LINEAR FOOTAGE: 0.48 linear ft

(face dimensions)

CRESCENT EDGER

The crescent shape of the edger allows these blocks to create curves, corners, and shapes with no cutting. They are perfect

for adding denition to gardens, driveways, lawns, patios, and more.

LENGTH NUMBER OF BLOCKS

5' 14

10' 28

20' 56

30' 85

LAWN/GARDEN EDGER

The shape of the crescent edgers

allows it to make any curve or

corner, up to 90°, without cutting a

single block

Gray

179-2605

Shown in Tan

2⅜"T

5¾"W

4⅜"D

▶◀

Red

179-2634

Tan

179-2663

PAGE 1
CRESCENT EDGER The crescent shape of the edger allows these blocks to create curves, corners, and shapes with no cutting. They are perfect for adding definition to gardens, driveways, lawns, patios, and more. DIMENSIONS: Shown in Tan BLOCK LINEAR FOOTAGE: 0.48 linear ft ◀ (face dimensions) ◀ ▶ 5¾"W ▶ ◀ WEIGHT: Approx.
PAGE 2
INSTALLING EDGERS STEP 1 - STAKE OUT & REMOVE SOD Begin by staking out the project. For curved sections, use a garden hose to lay out the edging line. The depth of the trench is dependent upon how far above grade you want your edger units to appear. STEP 2 - CLEAR AREA OF DEBRIS Prepare trench by removing roots and rocks. Smooth and place 1" of paver base in the bottom of the trench. STEP 3 - LAY & LEVEL EDGERS Place edgers end to end in the base. Using a rubber mallet, tamp the edgers firmly iinto place.