User Manual

9. Secure the Plastic Pan inside the Pet Home with
the Pan Stop attached to the front wire of the
Bottom Panel of the home.
The Plastic Pan easily slides out of the bottom
of the Crate for cleaning.
10. To install the Divider Panel, first decide the
appropriate length of the Crate to fit your pet.
Make sure your pet has enough room to run and
lie down. Insert the Divider Panel through the
Front Door and hook one side to the vertical
wires on one side of the home. Then hook the
other side of the Divider Panel to the opposite
side on the corresponding vertical wire. The
hooks of the Divider Panel should face away
from your pet’s area.
1. Release the Pan Stop and place underneath
Plastic Pan.
2. Unhook the End Panel by gently pressing on the
Top Panel and pulling the End Panel outward to
release the hooks. Let the End Panel gently fall
into place at the bottom of the Crate.
To Disassemble the Crate:
3
Pan Stop
Pan Stop