User Manual

4. Grab the panels that rest on top and pull
upwards. This will form the top and the sides of
the crate.
5. Make sure the bottom wires of the two Side
Panels rest inside the Bottom Panel and that
one edge of the Top Panel is “inside” the Side
Panel and outside the other Side Panel: (as
illustrated).
6. Reach in and pull the Front Door Panel toward
you until it is fully upright. Secure the Front
Door Panel to the Top Panel by gently pulling
outward on the Front Door Panel while pushing
down on the Top Panel. The hooks on the Front
Door Panel will fit over the end wire on the Top
Panel.
7. Repeat Step 6 with the End Panel
8. The crate is now fully assembled. To operate
the Side Door, lift the doors upward using the
handle.
When closing the Side Door, the Safety Catch
will prevent the doors from closing too quickly.
Use your finger to lift the Safety Catch upward
while closing; this will allow the door to
descend to the bottom of the Crate and into the
closed position. When lifting Safety Catch,
make sure the small S-Hook is clear of any
wires to safely close door. The Side Door can
be lifted and rested on top of the Crate keeping
it “up and away” for easy access to the inside
of the Crate.
2
Safety Catch
S-Hook
Side
Panels
Bottom
Panel
Top Panel