User Manual

ManualsBrandsMidWest Homes For Pets ManualsMidwest Homes For Pets Dog SuppliesMidwest 48" Ovation Double Door Training Crate

Remove collar, tags, and leads from pet before placing it in the home to prevent possible entanglement.

Unwrap and remove all parts from the box. Keep the box and packing material until the product is assembled. In case of

return or exchange, failure to return product in similar condition as received could result in limited reimbursement. Please

save sales receipt as proof of purchase for warranty purposes. Check to ensure you have all the parts below. If you

discover any parts are missing, immediately call our toll-free service helpline at 1-800-428-8560

(Monday - Friday 9 a.m. to 4 p.m. EST) or email customer service at info@midwesthomes4pets.com.

A - Fold and Carry Crate (1) B - Plastic Pan (1) C - Divider Panel (1) D - Plastic Carrying Handle(s)

ImPortAnt InformAtIon

PArts IdentIfIcAtIon

Assembly Instructions for Model Numbers

1924DD, 1930DD, 1936DD, 1942DD,

and

1948DD

Assembly InstructIons

1. Remove the folded Crate from the carton with the Plastic Pan

on the bottom and the logo nameplate facing up. Keep the

Crate flat on the floor as you begin assembly.

2. Release the side hook that holds the crate together on the

side of the crate.

3. Grab the wires on top of the Side Door Panel and unfold the

crate like you would open a book.

800-428-8560

midwesthomes4pets.com

P.O. Box 1031

Muncie, Indiana 47308

Summary of content (5 pages)

PAGE 1
800-428-8560 midwesthomes4pets.com P.O. Box 1031 Muncie, Indiana 47308 Assembly Instructions for Model Numbers 1924DD, 1930DD, 1936DD, 1942DD, and 1948DD ImPortAnt InformAtIon Remove collar, tags, and leads from pet before placing it in the home to prevent possible entanglement. Unwrap and remove all parts from the box. Keep the box and packing material until the product is assembled.
PAGE 2
4. Grab the panels that rest on top and pull upwards. This will form the top and the sides of the crate. 5. Make sure the bottom wires of the two Side Panels rest inside the Bottom Panel and that one edge of the Top Panel is “inside” the Side Panel and outside the other Side Panel: (as illustrated). Top Panel Side Panels Bottom Panel 6. Reach in and pull the Front Door Panel toward you until it is fully upright.
PAGE 3
9. Secure the Plastic Pan inside the Pet Home with the Pan Stop attached to the front wire of the Bottom Panel of the home. Pan Stop The Plastic Pan easily slides out of the bottom of the Crate for cleaning. 10. To install the Divider Panel, first decide the appropriate length of the Crate to fit your pet. Make sure your pet has enough room to run and lie down. Insert the Divider Panel through the Front Door and hook one side to the vertical wires on one side of the home.
PAGE 4
3. Repeat Step 2 with the Front Door Panel 4. Allow the sides and top of the Crate to swing down and collapse to the side until the Side Door Panel reaches the floor. 5. Fold the Top and Side Door Panel over like you are closing a book. 6. Secure crate by folding the crate hook over the collapsed crate. 7. The plastic carrying handles are provided so the folded crate can be easily carried from one location to another. Attach the plastic carrying handles on the opposite side of the crate hook.
PAGE 5
NOTES: To protect the finish of your Pet Home and the bottom pan, use only mild, non-abrasive cleaners and water. Any coarse scrubbing or abrasive materials could damage the finish. DO NOT expose the plastic pan to direct sunlight for extended periods of time as this may lead to warping or damage to the pan. To help reduce noise, place a piece of carpet or cut a piece from the crate carton and place it inside the crate beneath the pan.