Owner`s manual

12 ©2001 MIDWEST FASTENERS, INC. — CD 50 Stud Welder
CD-2 WELD GUN
SETUP
INSULATION PINS .
WITH.
INTERNAL STOP .
Weld
Pin
Optional Weld Gun Setup for Insulation Pins Longer Than 4"
(NOTE: shown with Internal Stop and Stop Adjuster
used for long pins, rather than “B”-Stop.)
1/8 - 3/16"
Protrusion
1. Seat weld pin firmly against internal stop.
2. Loosen these adjustment screws.
3. Slide the Leg / Foot assembly until weld
pin flange extends 1/8"- 3/16" beyond
foot (or spark shield.)
4. Retighten adjustment screw.
CD-2 WELD GUN
SETUP
WELD STUDS .
1. Seat weld pin firmly against “B” stop.
2. Loosen these adjustment screws.
3. Slide the Leg/ Foot assembly until
weld stud flange extends 1/8"- 3/16"
beyond foot.
4. Retighten adjustment screw.
1/8"- 3/16" Protrusion
Weld
Stud
Adjustable
Leg
Foot“B”
Collet
“B”
Stop
(Fig.3)
(Fig.4)