Owner`s manual

©2001 MIDWEST FASTENERS, INC. — CD 50 Stud Welder 11
CD-2 WELD GUN
SETUP
INSULATION PINS .
Weld
Pin
1. Seat weld pin firmly against stop.
2. Loosen these adjustment screws.
3. Slide the Leg / Foot assembly until
weld pin flange extends 1/8"- 3/16"
beyond foot (or spark shield.)
4. Retighten adjustment screw.
Adjustable
Leg
Foot
1/8"- 3/16" Protrusion
“B”
Collet
Spark
Shield
(Optional)
“B”
Stop
CD-2 WELD GUN
SETUP
INSULATION PINS .
WITH .
COLLET PROTECTOR .
Weld
Pin
1. If “B” Stop is used, seat weld pin firmly
against stop.
2. Loosen these adjustment screws.
3. Slide the Leg / Foot assembly until
weld pin flange extends 1/8"- 3/16"
beyond foot (or spark shield.)
4. Retighten adjustment screw.
Adjustable
Leg/Foot
1/8"- 3/16" Protrusion
“B”
Stop
(optional)
“B”
Collet
(inside
Protector)
Collet
Protector
Collet
Protector
Insert
(Fig.1)
(Fig.2)