Specifications
C-APTEF
1
OFRATION
SAFETY INSTRUCTIONS
The following safety instructions apply to operators and
seduce
personnel. Read these instructrons before
servicing or prepar’ng the Vloeo Game Machine !‘VGM) fo- play. Other saiety instructions appea- through-
out
th1.s
manual.
DEFINITIONS OF SAFETY TERMS
l DANGER Indica:es an imminent hazard. If you fall to
avoId
This
hazard,
!t
WILL cause death or serious
injury
. WARNING Indicates a poten% hazard. If you
fall
to avoid
tf?s
hazarc!.
it COULD cause death or serious
injury.
l CAUTION lndlcates a potential hazard If you fall to
avold
tl?is
hazard.
It
MAY cause minor or moderate
injury.
CAUTION also aierts “01 about unsafe practices
*
NOTE indicates informatlsn cf special importance.
___-
7
___
: Y
WARNING: TRANSPORTING GAMES.
: The VGM contaics glass and fragile electronic deuces. Use applropriate care
wrier1
transponing, A;o drough handling when moving the cabinet. Do not move with the
: power switcheo cn.
WARNING: DISC-ONNECT POWER.
Always turn tne power OFF and unplug the VGM before
attempl.ing
service or aojust-
merits unless othxwise Instructed. Installing or reparring boards
with
power switched
0’1
can damage components and
votd
the warranty
A
!
A
!
2
-
t
1
/
I
t
WARNING: GROUND GAMES.
Avoid electrical sxxksl Do not plug in a VGM until you have Inspected and properly
grounded
It
Only plug this game into a grounded, three-wrre outlet. Do not use a
“cheater” plug or cut off the groind pin on the line cord.
I
___~
~~
4
WARNING: AVOID ELECTRICAL SHOCKS. /
The VGM
system,
does not utilize an isolation transformer. Internal cabinet AC is not
isa-
j
lated from the ex:emal AC line.
WARNING: HANDLE FLUORESCENT TUBE AND CRT WITH CARE.
If you drop a fluorescent tube or CRT and ii breaks, it will Implode! Shattered glass, can
fly eight fee! or more from the implosion.
CAUTION: CHECK POWER SELECTOR, LAMP.
~
Set the 115:23%‘AC selector on the power supply for the COrreCt line
‘voltage.
Check the I
seiector se%ng before switching on the VGM.
Verify
that the fluorescent lamp assembly
is correct for tne iocai line voltage.
1
CAUTION: USE PROPER FUSE.
Avoid elecincai shock! Replacement fuses must be
identlcaffy
rated. Fuse voltage and
current ratings
r-rust
be identically rated to the origrnaf fuse.