Specifications

C-A~TE~ 1 OPE~l4TION
P
TYPICAL REAR DOOR HASP INSTALLATfON
14. Modify the lock plate at the top of ihe rear door. Remove the bolts and nuts from ttle lock plate. then
rotate !he plate so that the slot WIII be above the door. Reinstall the bolts and nuts arrd tighten firmly.
15. Reinstall the rear door onto the cabinet and close it. Lock the rear door and remove the key. If
required, rnstall the extra padlock through the hasp at this time. install the screws at the top and srdes
of the rear door and tighten snugly. Leave the remainrng doors open at this time.
LINE COf?D INSTALLATION
16. The power cord is packed in with the spare parts. insert a portron cf the lrne cord in the cord clamp
leavrng enough slack for the cord. Match the holes on the IEC plug ,tirth the prongs in the receptacle
and push firmly to seat the line cord.
17. Plug the game into a grounded (3-terminail X wall outlet. Switch on power to the game using the ON/
OFFswrtch located on the upper ieft top of -he cabinet (when viewed from the player’s positron). The
game will power up and begin its self test. Ii no errors are found. the game will automatically enter the
attract mode of operatron (scenes and sounc!s from typicai races. player’s scores, messages, etc.).
18 Open the corn door. Press and hold the Begjo Test button on the operator control switch panel to enter
the menu system. Wait untrl the Main Menu screen appears on the monrtor.
ASCTIC TH~NDEP 7