Product specifications

16 M

IDWAY

MUSEMENT

AMES

, LLC

HAPTER

3 S

ERVICE

To service the Seat Slide Assembly…

Refer to the Seat Pedestal Service illustration.

• Switch off the power to the game machine and unplug the AC line cord.

• Disconnect the Seat Assembly from the cabinet by removing the tamper resistant screws used to fasten

the assembly to the slide rails in the cabinet.

• Slide the Seat Assembly halfway back along the rails to expose wiring.

• Disconnect the speaker cable and slide the seat the rest of the way off the rails.

• Remove 3 tamper resistant screws from each side of the seat mounting plate. Lift the seat and mounting

plate assembly off the pedestal and set aside.

• Slide the seat assembly forward, and remove the two tamper resistant screws from the rear of the metal

panel on top of the pedestal assembly.

• Slide the seat assembly backward and remove the two tamper resistant screws from the front of the

metal panel.

• Lift the metal panel out of the pedestal base and turn the unit over.

• Remove the four nuts holding the metal panel to the slide assembly. Set the metal panel aside and slide

assembly is exposed.

• Perform the desired repair or equipment replacement.

• Reinstall by performing the steps in reverse and fasten in place using the hardware provided.

IMPORTANT:

Apply removable anaerobic adhesive thread lock (Loctite Blue 242 or equivalent) and torque

each bolt to seven to nine ft.-lbs. (0.7 to 1.0 Nm) if it was loosened (see illustration).

To service the Seat Assembly…

The Seat Assembly includes the pedestal base

Refer to the Seat Pedestal Service illustration.

• Switch off the power to the game machine and unplug the AC line cord.

• Disconnect the Seat Assembly from the cabinet by removing 8 tamper resistant screws used to fasten