Product specifications

C.A.R.T. FURY 15
C
HAPTER
3 S
ERVICE
To service the Power Supply, continued…
• Remove the two front and two rear screws from the supply, then lift it off of the power chassis. Note volt-
age setting.
• Perform the desired repair or equipment replacement.
• Be sure to set the voltage switch to the correct value prior to reinstallation.
• Set the supply on the power chassis and align the mounting holes. Install the four screws and the two
power connectors.
To service the Transformer…
• Switch off the power to the game machine and unplug the AC line cord.
• Unlock and remove the rear door.
• If the power to the Video Game Machine (VGM) was only recently disconnected, the transformer may
still be warm. Allow the transformer to cool completely before handling.
• Label and disconnect all wiring, including ground.
• Remove the screws used to fasten the transformer to the base of the cabinet.
• Perform the desired repair or equipment replacement.
To service Fan Assembly…
• Switch off the power to the game machine and unplug the AC line cord.
• Unlock and remove the rear door.
• Remove the perforated metal cover to expose the fan assembly and set aside.
• Unplug the fan power connector from the wiring.
• Remove the screws used to fasten a fan down and then lift fan out.
• Perform the desired repair or equipment replacement.
To service Speakers in Head Rest…
Refer to the Seat Pedestal Service illustration.
• Switch off the power to the game machine and unplug the AC line cord.
• Remove the tamper resistant screws from the speaker grille.
• Remove the tamper resistant screws used to fasten the speaker plate to the seat and pull forward.
• Label and disconnect wires, including ground.
• Remove the nuts used to fasten the speaker to the plate and remove speaker(s).
• Perform desired repair or equipment replacement.
• Reinstall the speaker(s) to the speaker plate and reattach wiring, including ground. Attach the speaker
plate to the seat.
• Reinstall speaker grille and fasten in place with hardware provided.
To service Speaker in Seat Back…
Refer to the Seat Pedestal Service illustration.
• Switch off the power to the game machine and unplug the AC line cord.
• Remove the tamper resistant screws used to fasten the grille to the seat and pull forward.
• Label and disconnect wires, including ground.
• Remove 4 Phillips head screws used to fasten the speaker to the seat and remove speaker.
• Perform desired repair or equipment replacement.
• Reinstall speaker and reattach wiring, including ground.
• Reinstall speaker grille and fasten in place with hardware provided.
DANGER
High voltage present. Exercise extreme caution while servicing transformer.