Product specifications

C.A.R.T. FURY 9
C
HAPTER
3 S
ERVICE
To service the Dashboard PCB, continued…
• Remove the tamper resistant screws used to fasten down the dash panel insert. Lift the insert from the
dash.
• Pull out the PCB back plate from the molded dash.
• Remove the ribbon and power cable connections.
• Remove the snaps used to fasten the PCB to the back plate. Lift the PCB off the back plate.
• Perform the desired repair or equipment replacement.
• Connect the ribbon and power cable to a Dashboard PCB. NOTE: The red stripe on the ribbon cable
must be lined up with pin 1 on the PCB, and the black wire on the power cable must line up with pin 1 on
the power connection for the Dashboard.
• Reattach the PCB to the back plate, and then fasten the back plate to the molded dash.
• Check for pinched wires.
• Reinstall the Dashboard and fasten in place with the screws provided.
D
ASH
PCB S
ERVICE
To service Start and View Buttons…
• Switch off the power to the game machine and unplug the AC line cord.
• Remove the 3 tamper-resistant buttons used to fasten the faceplate.
• Pull the plate forward enough to expose the switches.
• Label and disconnect the wiring.
• Lift assembly completely out of the dash and set aside.
• Perform the desired repair or equipment replacement.
• Reconnect wires and reinstall buttons.
• Check for pinched wires.
• Fasten the faceplate with the screws provided.