Product specifications

C.A.R.T. FURY 7
C
HAPTER
3 S
ERVICE
• Switch off the power to the game machine and unplug the AC line cord.
• Remove the Control Cabinet, Marquee Housing, and Monitor Bezel. Refer to service instructions for the
Control Cabinet, Viewing Glass and Monitor Bezel.
• Open the rear cabinet door and disconnect the monitor from the wiring harness and ground wires.
• Remove 4 nuts securing the monitor mounting flanges to the mounting panel.
• Pull the monitor carefully from the cabinet and set aside.
• Perform the desired repair or equipment replacement.
To service the Control Cabinet…
Refer to the Control Cabinet Service illustration.
• Switch off the power to the game machine and unplug the AC line cord.
• Remove the tamper resistant screws from either side of the control cabinet used to fasten it to the cabi-
net brackets in the main cabinet.
• Slide the control cabinet halfway back along the rails to expose wiring. Label and disconnect all wiring.
• Continue to slide the cabinet away from the main cabinet until it clears the mounting rails.
• Perform the desired repair or equipment replacement.
C
ONTROL
C
ABINET
S
ERVICE
WARNING
The monitor does not require isolation from the AC line voltage in normal operation.
When operating outside the cabinet or servicing the monitor on a test bench, ISOLATE
THE MONITOR FROM LINE VOLTAGE WITH AN ISOLATION TRANSFORMER.