Product specifications

4M
IDWAY
A
MUSEMENT
G
AMES
, LLC
C
HAPTER
3 S
ERVICE
SERVICING
Only qualified service personnel should perform maintenance and repairs. The product guidelines apply to
all operators and service personnel. Specific notes, cautions, and warnings appear throughout the manual
where they apply. We recommend that you read the SAFETY NOTICES section thoroughly before begin-
ning service.
NOTE:
Always switch off power to the game machine before servicing.
To service the Marquee…
Refer to Marquee Service illustration.
• Switch off the power to the game machine and unplug the AC line cord.
• Remove the center control cabinet. Refer to service instructions for Control Cabinet.
• Remove the hardware from the bracket along the bottom edge of the marquee housing.
• Grasp the bracket and lift the marquee housing up. The hinged marquee housing uses a prop rod
located inside the main cabinet to keep it extended during service. Remove the free end of the prop rod
from its retaining clip and insert it in the rod bracket on the lower right side of the marquee housing.
• Perform the desired repair or equipment replacement.
• To reinstall, unhook the prop rod and return it to the retaining clip. Slowly lower the marquee housing and
thread the tension chain back into the main cabinet.
• Fasten the marquee housing’s bracket in place with the screws provided.
M
ARQUEE
S
ERVICE
To service the Backlit Marquee …
Refer to Marquee Service illustration.
• Switch off the power to the game machine and unplug the AC line cord.
• Lift open the Marquee Housing. Refer to service instructions for Marquee.
• Reach up inside the opening toward the marquee artwork. The marquee artwork and marquee glass is
held in place at the top and sides by spacers/brackets fastened with screws.
• Remove the screws from each of the brackets. Set the screws and brackets aside until reinstallation.
• Lift the marquee artwork or marquee glass out of the housing.
• Perform the desired repair or equipment replacement.
FRONT
PERSPECTIVE
VIEW