Product specifications

8M
IDWAY
A
MUSEMENT
G
AMES
, LLC
C
HAPTER
1 O
PERATION
12. Reinstall the rear door onto the cabinet and close it. Lock the rear door and remove the key. If
required, install the extra padlock through the hasp at this time. Install the screws at the top and sides
of the rear door and tighten snugly. Leave the remaining doors open at this time.
13. The power cord is packed in with the spare parts. Insert a portion of the line cord in the cord clamp
leaving enough slack for the cord. Match the holes on the IEC plug with the prongs in the receptacle
and push firmly to seat the line cord.
LINE CORD INSTALLATION
14. Plug the game into a grounded (3-terminal) AC wall outlet. Switch on power to the game using the
ON/OFF switch located on the upper left top of the cabinet (when viewed from the player’s position).
The game will power up and begin its self test. If no errors are found, the game will automatically enter
the attract mode of operation (scenes and sounds from typical races, player’s scores, messages, etc.).
15. Open the coin door. Press and hold the Begin Test button on the operator control switch panel to enter
the menu system. Wait until the Main Menu screen appears on the monitor.
TYPICAL COIN DOOR SWITCH LOCATION
16. Follow on-screen instructions to select Diagnostics, then choose
SWITCH TEST
. Follow the on-
screen instructions to verify that each of the controls is operational. If no errors are found, the controls
should function well.
17. Return to the Diagnostics screen, then choose
SPEAKER TEST
. Follow the on-screen instructions to
verify that each of the speakers is operational. If no errors are found, the audio should function well.