User Manual

• 18 •
Changing the Printer Paper
The MDX-P300 integrated printer is shipped with a roll of thermal printing
paper installed in the paper compartment. The roll size is 2-1/4 inches
wide by 1-7/8 inch in diameter. Replacement rolls are available at most
ofce supply stores.
The tester uses only thermal printing paper. Below are four major ofce
supply stores that carry the recommended paper:
Store Part Number Phone
Ofce Depot 209-653-271 800-463-3768
Ofce Max 20121146 800-283-7674
Quill 856607 800-789-1331
Staples 531236 800-378-2753
To replace the paper roll:
1. Unlock the printer door by gently pressing forward on the red lever.
Remove the spent roll.
2. Place a new roll of paper in the compartment, and pull the paper for-
ward so that it extends past the serrated edge of the paper slot.
paper
compartment
release lever: press in this direction
paper
sensor
paper feeds from
underneath the roll