Installation Manual

ManualsBrandsMidNite Solar ManualsDisconnectMidNite Solar MidNite MNPV8HV-DLTL 4X-PSB Disconnecting Combiner Box

MNPVHV Disco Instructions (continued)

31 | P a g e 1 0 - 065- 1 R E V : F

Step 3:

Remove red plastic cover from the

Positive output terminal Busbar.

Remove existing Positive output Busbar.

Step 3A:

Install Busbar and Lug assembly and

tighten. Refer to the torque chart on page 4

Replace Red plastic cover.

It may be necessary to loosen the Positive

Output Terminal Busbar to remove /

reinstall busbars.

MNPV8HVMCM300 Kit fully installed.

The MNPV8HV is now ready to accept up

to 300 MCM output wires.