HV Disconnecting Combiner Manual

MNPVHV Disco Instructions (continued)
6 | P a g e 1 0 - 065- 1 R E V : J
Enclosure Notes Continued:
Tighten hole plugs firmly on 4X units with MidNite Solar tool part number 5-151-1 (included). Tighten
from the inside of the combiner to avoid twisting the gasket.
Installing adapter fittings:
When using reducing adapters, install the adapter and gasket through the front and the nut from
inside the combiner. Tighten firmly from the inside of the combiner with tool supplied.
Hole plug parts placement on Type 4X Chassis
Tighten from the inside of the combiner
Reducing adapters shown installed