HV Disconnecting Combiner Manual

MNPVHV Disco Instructions (continued)

25 | P a g e 1 0 - 065- 1 R E V : J

Installing the MNDiscoPSB Power Supply PCB:

You will need:

3/16” Slotted screwdriver, #1 Phillips screwdriver, Wire strippers, ¼” nutdriver and a wire crimper to attach lugs.

Included in the MNDiscoPSB Kit.

Parts included with MNDiscoPSB kit.

Qty Description MidNite Solar PN

1 PCB MNDiscoPSB 8-037-10

1 Formex Insulator 5-144-1

1 Wire 18 AWG Red 9-367-1

1 Wire 18 AWG White 9-390-1

1 Wire 18 AWG Black 9-421-2

1 Double Ferrule 6-166-1

2 Terminal 18-22 AWG 6-168-1

2 Screw 6-32 6-274-1

2 Standoff ½ Inch 6-154-1

1 Silicone Grease Packet 9-757-1

2 #6 Internal Tooth Washer 6-155-1

2 Circuit Board Support 6-148-1