HV Disconnecting Combiner Manual

MNPVHV Disco Instructions (continued)
19 | P a g e 1 0 - 065- 1 R E V : J
Ring lugs are included to allow easy installation of the MNSPD.
If they are to be used, then you would need to strip the wire, push it
into the barrel of the ring lug and crimp the barrel with an
appropriate crimper. Make sure to pull on the wire after crimping
to verify that the crimp is adequate.
Black wire from MNSPD
Red wire from MNSPD
Green wire from MNSPD
Connections for Non-Isolated.
Refer to the wiring diagrams starting on page 17 for more
information or If adding a second MNSPD600 (not included).