MNPSB Instructions

MNBN Installation Instructions (continued)
4 | P a g e 1 0 - 2 19- 1
R E V : -
Installing the MNBN BirdNest Power Supply Power Supply PCB: Continued
Step 1: Remove the top cover and deadfront (Page 3).
Step 2: Remove plastic supports (2) by
removing screws from the back side
of the combiner. Set aside to reinstall
later.
Step 3: Place the Formex insulator as
shown.
Step 4: Install metal standoffs (2) and
Reinstall plastic PCB supports (2)
removed in Step 1.