MNPV10 and 12 Manual

MNPV10, MNPV12 Combiner Instructions (continued)
5 | P a g e 10- 2 5 9 - 1 R E V : D
The following dimensioned drawings show the enclosure size and location of knockouts available on the
MNPV12. Surge Suppressors may require a locknut on the outside in order to clear the lid.
Two 7/8” knockouts (1/2” conduit openings) are located on the sides of the MNPV12. These are primarily
intended for surge suppressors. One 1 ¼” conduit knockout is located on the back mounting surface.
PV input knockouts for these combiners are a dual
concentric knockout that can accept bulkhead mount MC
cable connectors. Configuring these enclosures with the
bulkhead mount connectors in advance can save time in
the field. Several brands will fit the ½” diameter
knockouts.
MNPV12 bottom dimensions
MNPV12 side and front dimensions