KID Solar Charging Kit

Midnite Kid Basic Solar Charging Kit
10 | P a g e 10- 4 0 4 - 1 R E V -
Wiring the GFP-63 breaker
The positive PV wire connects to the bottom (the ++ end) of the MNDC-GFP63 breaker on the left-hand side.
From the top of the MNDC-GFP63 breaker on the left-hand side, the wire wraps around to the bottom of the
PV Breaker. The wire from the top of the PV breaker goes up to the PV + connecter in the KID.
The negative wire connects to the negative bus bar. Followed by the white wire from the MNDC-GFP63.