KID Manual Firmware Rev 1761

The Kid Solar Charge Controller Instructions
24 | Page
1 0-268-1 REV B
0.0A Resting
13.7 Solar 0W
Input Battery
5.4V 13.7V
0.0a SOC 100%
400Ah Remaining
Load: Manual
0.0a Off
KWhr KID Ahr
0.0 0.0
0.0A Resting
13.7 Solar 0W
Input Battery
5.4V 13.7V
0.0a SOC 100%
400Ah Remaining
CPU FET Batt
25c 23c 23c
KWhr KID Ahr
0.0 0.0
Status Screens.
The Kid has several status display screens showing voltage, charge mode, temperatures, currents
and voltages. These screens are displayed any time that the LCD is on and you are not in a menu.
If you press the STATUS button the following screens will be displayed. The first screen is displayed
by default and the others are available by pressing the right arrow. The left arrow will step back
through the status display screens.
When The Kid has been idle for five minutes the display will cycle through the following screens.
Each screen will display for a few seconds and then advance to the next.
You may push the arrow keys anytime while The Kid is cycling through these screens to return to
manually stepping through the status screens shown above. The STATUS and MENU BACK buttons
are always available. Scrolling may be disabled in the LCD Menu.