KID Manual Firmware Rev 1761

11 | Page
1 0-268-1 REV B
The Kid Solar Charge Controller Instructions
3. Marine mount.
The third way to mount the KID is with the Marine Mount Bracket.
MNKID-M-BKT-W (White) or MNKID-M-BKT-B (Black) Marine Mounting Brackets.
This bracket comes standard with Marine versions. There are two metal pieces that come with
the Marine Mount Bracket. A collar that mounts to the KID and the Marine mounting bracket base.
Mount the KID to the collar using four 8-32 screws and nuts provided. The kit is available in black
or white.
If your installation is to have wiring go through the bracket, then first remove the knockout holes.
Mount the bracket securely to a suitable surface Using #1 0 (5mm) screws.
The base may be mounted from under or above. Two thin rubber washers are provided that go
between the collar and the bracket. They help keep the KID from slipping after tightening up the
black knobs.
Important!
Mounting bracket may not be suitable for extreme vibration environments.
The Kid has an IP rating of 50 and should be protected from rain, snow or other moisture.