Kid Manual
9.275
ControllerIn
structions
8.675
Template
504
.
5
4
4
.
Charge
M
o
u
n
t
i
n
g
T
h
e
K
I
D
S
o
l
a
r
8764.
W
al
l
To use this template:
Remove template from the manual and secure to the wall with a low tack tape such as scotch or masking tape.
Other tapes are more likely to stick to the paint when they are removed. Remove all tape within 24 hours.
Make sure that the template is flat and not crooked.
Use a large drill inside the cut-out area to create an entry point for the saw. Use a drywall or jig saw and cut along the
dotted lines using caution especially around the corners. A hole saw may be used in the inside corners.
Drill the four corner holes with the smallest drill that will work with your hardware. Use caution to avoid breaking through to
the large cut-out area.
Put The KID in place and secure with appropriate hardware.
Photocopies of the template may not be accurate and should be avoided.
1 0
-268
-1 REV T
015. 0
61 | Page