Manualshelf

Instruction Manual

ManualsBrandsMidNite Solar ManualsCharge ControllerMidNite Solar Kid 30a MPPT MNKID-C1D2 - Industrial Rated Charge Controller
52535455565758596061
61 | Page
The KID Solar Charge Controller Instructions
1 0-268-1 REV P7
Wall Mounting Template
To use this template:
Remove template from the manual and secure to the wall with a low tack tape such as scotch or masking tape.
Other tapes are more likely to stick to the paint when they are removed. Remove all tape within 24 hours.
Make sure that the template is flat and not crooked.
Use a large drill inside the cut-out area to create an entry point for the saw. Use a drywall or jig saw and cut along the dotted lines
using caution especially around the corners. A hole saw may be used in the inside corners.
Drill the four corner holes with the smallest drill that will work with your hardware. Use caution to avoid breaking through to the large
cut-out area.
Put The KID in place and secure with appropriate hardware.
Photocopies of the template may not be accurate and should be avoided.
4.54
8.764
9.275
8.675
5.010
4.50