E-Panels Explained
5
MNE250SMA-OG/AC DM FEATURES:
60amp, 120/240vac Output/Bypass system
Separate 60amp, 120/240vac AC input and output breakers for the master inverter
250amp remote trip battery breaker with inverter cables
500amp/50mV shunt (MNSHUNT)
Battery negative busbar
AC input and output busbars
Neutral and ground busbars
AC input and output wiring
All breakers are hydraulic-magnetic and rated for continuous duty
Space provided for 6 additional 1/2" wide din rail mount AC or DC breakers and up to 12
3/4" wide panel mount breakers
Knockouts located for battery cables
AC conduit connections
Warranty - 5 yrs.
Listed by ETL for US & Canada
Made in the USA
MNE250SMA-QUAD MSTR - This E-Panel works
with three of the MNE250SMA-Slave E-Panels to
create a Quad stack of Sunny Islands. The
MNE250SMA-Quad Mstr includes the Quad
125amp, 120/240vac input/output bypass
system. This E-Panel can be used in conjunction
with a Sunny Island inverter as part of a Quad
off-grid, battery backup or AC Coupled system.
Terminals are provided for hookup to leg 1 + 2 in
the Slave E-Panels. This unit comes with a
250amp remote trip battery disconnect breaker
and inverter cables and is pre-wired with AC input and output wiring for leg one (master) inverter.
(Three slaves are also required for Quad system.) NOTE: A back plate (MNESMA-Short BP) is
recommended for the proper wiring alignment of the Sunny Island.
MNE250SMA-QUAD MSTR FEATURES:
125amp, 120/240vac AC Output/Bypass system
Separate 60amp, 120/240vac AC input and output breakers for the master inverter
250amp remote trip battery breaker with inverter cables
500amp/50mV shunt (MNSHUNT)
Battery negative busbar
AC input and Output busbars
Neutral and ground busbars
AC input and output wiring
Transition terminals to Slave E-Panels
Space provided for 6 additional 1/2" wide din rail mount AC or DC breakers and up to 12
3/4" wide panel mount breakers. All breakers are hydraulic-magnetic and rated for
continuous duty.
Knockouts located for battery cables
MNE250SMA-QUAD MSTR