SMA E-Panel Installation Manual

SMA E-Panel installation manual
16 | P a g e 10- 234- 1 R E V : A
INSTALLING CONDUIT BETWEEN E-PANELS:
Bushing
Nut
Fitting
Conduit
Fitting
Nut
Bushing
Conduit and fitting parts
With one inverter installed, remove the top
and bottom knockouts (see image next page)
that face the other E-Panel and push one of
the fittings from the outside through the
knockout opening into the E-Panel.
Inside the E-Panel, secure the fitting with
one of the nuts and a bushing
These instructions are for installing the supplied conduits and fittings in a system with a Battery
Combiner.