SMA E-Panel Installation Manual
SMA E-Panel installation manual
11 | P a g e 10- 234- 1 R E V : A
Mounting the SMA E-Panel to the wall cont.:
E-Panel mounting holes
E-Panel mounting holes.
Place the E-Panel below the inverter and line up the E-Panel mounting holes with the holes in the backplate.
Attach the E-Panel to the backplate with ΒΌ-20 bolts. Pressed in nuts are provided on the backplate.
Remove the deadfront
(metal front cover) by
removing the screws in the
four corners and the two
on the DC disconnect
breaker.
When reinstalling the
deadfront ensure that the
breaker handles are
protruding through the
slider as shown.
Slider